All-In-One Torque Spec List. I had some time on my hands and got tired of repeatedly digging through the service manual for torque specs, so I compiled this list of every torque specification I could find. I thought others in the community might find it helpful. Tighten in a star pattern, 2 turns at a time. the recommended torque by the appropriate factor shown in the table. Example: bolt and nut are both phosphated; required torque = torque recommended x 0.75. Surface condition of bolt Self Zinc Cadmium Phosphate Self 1.00 1.00 0.80 0.90 Zinc 1.15 1.20 1.35 1.15 Cadmium 0.85 0.90 1.20 1.00 Phosphate and oil Height of mating surface 1.76 mm-2.12 mm. Peak-to-valley height of mating surface (reference length 2.5 mm vertical to groove direction) R 3z = 6.0 μm. Oil pressure at 800-850 rpm 1.3 bar-2.5 bar. Oil pressure at 4000 rpm 3.7 bar-5.5 bar. Torque Specifications Description Nm lb-ft lb-in. from mk1 haynes manual: main bearing cap bolts & nuts - 80Nm 59 lbf ft. clinder head bolts: stage 1 25 Nm 18 lbf ft. stage 2 45 Nm 33 lbf ft. stage 3 angle tighten a further 105 degrees. i cant see the settings for conrods because theres so many in the list. your better off buying a mk1 haynes, i just so happen to have a spare new one for sale A clamp broke on me Tuesday morning. AA came and found it but couldn't get a part. I've ordered the clamp, new injector washer and the clamp bolt. The thing that nobody could tell me (even Ford with any certainty) is the torque settings. Ford said they think it should be 7Nm + 55 degrees but they weren't sure! Dipstick tube bolt (1x) - Final Torque: All 450 & 452: 12Nm 9Nm: Sump drain plug: All 451: 65Nm: Cam Shaft Applicable Models Torque; Camshaft sprocket bolt (1x) All 450 & 452: 21 Nm + 90°+ 10° Camshaft cap bolt (2x per cap) - Initial Torque Camshaft cap bolt (2x per cap) - Final Torque: 450 599cc engines only: 11Nm 8.4Nm: Camshaft cap bolt Max. torque at 4500 rpm: 185 Nm: 185 Nm: Maximum engine speed (intermittent) 6675 rpm: 6675 rpm: Maximum engine speed (continous) 6450 rpm: 6450 rpm: Idle speed: 700 ± 50 rpm: 700 ± 50 rpm: Number of main bearings: 5: 5: Camshaft drive: Chain: Chain: Maximum oil consumption: 0.5 l/1000 Km: 0.5 l/1000 Km idk about the 1.6, our system only shows us models, but the 2.0 and 2.3 are. Tighten the bolts in the sequence shown in 3 stages. Stage 1: Tighten to 50 Nm (37 lb-ft). Stage 2: Tighten to 80 Nm (50 lb-ft). Stage 3: Tighten to 112 Nm (83 lb-ft). Technical specs and performance data for the Ford Focus 1.6 TDCi Duratorq 115 (2011-2015) Peak Torque 270 N·m 199 lb·ft. Peak Torque @ 1,750 RPM. Valvetrain SOHC. True Ford Enthusiast. 2.3k. Name: Mike. Ford Model: Mk2.5 Zetec 1.8HE hatch. Ford Year: 2010. UK/Ireland Location: Cambridgeshire. Posted July 17, 2017. I was going to fit new plugs to our Mk2.5 1.8HE only to find the useless Haynes doesn't give a torque setting for them. It only gives one for the coil retaining bolts. NjvJKCF.